Comprehensive, scalable and secure routing solutions specifically designed to meet the needs of both enterprise and service providers. All of Juniper’s routers - core, multiservice edge and carrier Ethernet - run on one common operating system - JUNOS.
Juniper’s next-generation routing architecture provides the solid, reliable, high-performance foundation upon which today’s real-time, critical networking applications can be delivered. Juniper Networks offers a comprehensive enterprise routing portfolio consisting of :
Enterprise solutions
Service provider solutions
J Series Services Routers
Juniper Networks J Series routers offer modular flexibility, performance headroom, and extensible memory to meet future demands, providing unmatched reliability, investment protection, and value for the enterprise.
Juniper Networks J Series Services Routers are ideal for branch offices connected directly to a traditional private network such as leased lines, Frame Relay, ATM, or MPLS, or for branch offices where the public Internet is used as an alternative to a traditional private WAN. Because the J Series routers offer superior performance while running services such asstatefull firewall, NAT, and IPsec, they are also ideally suited for metro Ethernet deployments.
The J Series Services Routers are typically deployed at remote offices or branch locations and include the J2320 and J2350 for smaller offices, the J4350 for medium-size branches, and the J6350 for large branches or regional offices.
Juniper Networks J series services routers leverage Junos software with enhanced services to combine best-in-class routing and best-in-class stateful inspection frewalls, allowing you to:
- Speed up network-wide releases
- Secure critical information and protect your network
- Minimise the cost of installing and operating your network
- Simplify the operation of the branch network
M Series Multiservice Edge Routers
Juniper Networks M Series Multiservice Edge Routers combine best-in-class IP/MPLS capabilities with unmatched reliability, stability, security, and service richness. They are ideal for enterprises and service providers and can be deployed in small and medium core, multiservice edge, collapsed POP routing, peering, route refector, campus or WAN gateway applications.
The M Series Multiservice Edge Routers - the M7i, M10i, M120 and M320 - have a wide array of WAN Interfaces typically deployed in head office locations where high performance packet processing is required, such as Internet access gateways, WAN aggregation devices, data center routers, or backbone routers.
Juniper Networks M Series Multiservice Edge Routers provides:
- Realibility
- Stability
- Security
- Service richness
- Enables generation of new types of revenue with cutting-edge services
- Consolidation of multiple networks in single IP/MPLS
M7i
Is ideal as an IP/MPLS provider edge router in small POPs or as an enterprise routing solution for Internet gateway or branch aggregation.
M40e
Targeted for dense dedicated access aggregation and provider edge services in medium-sized and large POPs.
M120
Service aggregation for the multiplay needs of both service providers and enterprise users.
MX Series Ethernet Services Routers
The MX Series 3D Universal Edge Routers - MX80, MX240, MX480 and MX960 - are optimized for Ethernet and provide high-performance and high port-density routing and switching in both campus core and aggregation, in data center core and aggregation, and WAN edge. Juniper Networks MX Series Ethernet Services Routers function as fully redundant, high-performance data center network core and aggregation layer 2 and layer 3 devices.
The MX Series allows customers to extend advanced MPLS capabilities like scalability, reliability and traffic engineering deeper into their data center networks. It enables virtualization of network resources and accommodates the need for virtual machine moves across routed segments.
The MX Series enables enterprise networks to proft from the tremendous growth of Ethernet transport with the confdence that the platforms they install now will have the performance and service fexibility to meet the challenges of their evolving requirements providing:
- Interface Scalability -MX Series scales in size with choices of 3, 6 or 12 slots
- Advanced Packet Processing Performance - MX Series supports up to 2.4 billion pps forwarding.
- Service Flexibility - Juniper is an industry leader in both MPLS and VPLS
- Advanced Hierarchical QoS - enables traffic shaping at the port, shaping and scheduling among a group of VLANs, and priority-based scheduling at the queue level.
- Industry’s richest portfolio of VPNs
- High Availability - continuous systems advantage, ensuring non-stop operations and maximum uptime
- Service Protection - provide local or end-end service protection of services configured on the MX Series
- Virtual Chassis technology - Improves network utilization, device utilization, scalability, and resiliency
- Simplified Management - Junos OS provides users with simple to use tools to administer and manage routers
MX80
Designed to create a cost-effective Ethernet service solution ideal for environments with severely limited space
MX960
A high-density Layer 2 and Layer 3 Ethernet platform for several service provider Ethernet edge scenarios
BX Series Multi-Access Gateways
Operators need a new approach to mobile backhaul - one that is scalable, fexible, cost efective
and ensures a smooth migration to future technologies. The BX7000 Multi-Access Gateway meets these needs and effectively addresses the backhaul evolution challenge for mobile operators with the most operationally efficient approach and Designing next-generation backhaul networks based on IP/MPLS will significantly reduce OPEX of mobile operators.
Key features include:
- Small form-factor
- Optionally hardened chassis
- Comprehensive suite of IP/MPLS features
- Open slot provides interface flexibility
- Various options for timing and synchronization
- Zero-touch configuration support
BX7000
Backhaul solution, which addresses an operator's current operating expenditures and bandwidth challenges
CTP Series Circuit to Packet Platforms
Juniper Networks CTP Series Circuit to Packet Platforms provide the advanced technology and features required to reliably transport Time Division Multiplexing and other circuit-based applications across next-generation IP networks. It has the feld-proven fexibility, performance, and reliability required for circuit applications such as:
- SS7 transport over IP
- TDM over IP solution
- PBX interconnect over IP solution
- PBX Extension over IP with 2WFXS/2WFXO
- Leased line extension over IP solution
- Radio over IP solution
- Serial encryption over IP solution
- T1 and E1 backup over IP
The Juniper Networks CTP Series Circuit to Packet Platforms provides customers to connect circuit-based applications easily and reliably across the IP network:
- Software circuit provisioning
- Scalable product family
- CTPView Network Management System
- Multiple system and circuit clocking solutions
CTP150
Support up to 8 T1/E1 interfaces, 8 serial interfaces, or 4 of both interface types.
CTP2024
Modular chassis that supports 24 interfaces of circuit emulation traffic in a 2 RU
CTP2056
Modular chassis that supports 56 interfaces of circuit emulation traffic in a 4 RU
E Series Broadband Services Routers
The E Series Broadband Services Routers support the efficient delivery of high-speed Internet access, IPTV, video on demand, VoIP, online gaming and interactive multimedia applications for business and residential customers. Juniper Networks E Series Broadband Services Routers fexibly address these diverse and demanding business and technical requirements while concurrently helping to control operational costs.
Key features and benefits:
- High-performance architecture
- Comprehensive subscriber management
- Reliable, "always-on" services
- Advanced QoS for multiplay services
- Consistent cross-platform features
ERX1410
An edge routing platform that is optimized for large circuit aggregation applications
ERX1440
A high-performance router optimized for small to medium-sized points of presence (PoPs)
JCS1200 Control System
The Juniper Networks JCS1200 Control System enables service providers to maintain a distinct separation between services, easily allocate additional resources as services grow, and quickly deploy new services - all while protecting investment in expensive forwarding hardware.
Key Features and Benefts
- Purpose-built “Routing Engine chassis”
- Hardware-based router virtualization
- Control plane extension to T Series
- High availability hardware
- High availability sofware
- Solid, modular, feature-rich sofware
- Wide range of interfaces
- Logical routing capability
JCS1200
An innovative system for scaling the control plane of routers and allowing the clean partitioning of services or network elements
LN Series Mobile Secure Router
The Juniper Networks LN1000 is a secure, high-performance router delivered in a small form factor energy efcient package that can be embedded in a customer chassis for portable and transportable router markets, making it the perfect solution for even the most demanding mobile network applications.
The key components of the LN1000 are
- high-performance routing for mobile networks
- security features that include a firewall and IDS
- small footprint
- conduction cooled packaging system
- powerful Juniper Networks Junos operating system
LN1000
A secure, high-performance edge access router in a small form factor energy-efficient package
T Series Core Routers
Juniper Networks high-end routing products provide the leading features demanded by service providers today to handle the massive growth in core bandwidth requirements. T Series Core Routers, in conjunction with the JCS1200, provide a unique solution that’s fexible and robust enough to tackle new challenges. JCS1200, the industry’s only independent control plane scaling system, brings virtualization to the core of the network. T Series, with the new TX Matrix Plus, provides transport scale up to 25 Tbps. The result is the world’s most fexible routing system, enabling customers to build scalable networks that adapt to changing business models.
Key benefits
- Multi-terabit capacity and multichassis scalability
- High availability hardware
- High availability sofware
- Superior packet processing via programmable ASIC-based Packet Forwarding Engine (PFE)
- Wide range of interfaces
- Virtualization at scale
- Solid, modular, feature-rich sofware
- Optical transport integration
T320
Designed for use where rack space is at a premium and a wide range of interface speeds are needed
T640
Addresses the need for highly scalable, high-performance core routing at a fraction of the size of competitive offerings
T1600
Multi-chassis capable design addresses the need for highly scalable, high-performance core routing at a fraction of the size of competitive offerings
T4000
Delivers 4Tbps of traffic in a single half rack routing node, making it the densest 10/100 GE line rate IP/MPLS routing system.
TX Matrix
Interconnects up to four T640 chassis into a single routing entity with 32 slots and a sustainable throughput rate of 2.5 Tbps (up to 3 billion pps)
TX Matrix Plus
A central switching and routing element, interconnects up to 16 T1600 chassis into a single routing entity